<track id="q49da"><ruby id="q49da"><tt id="q49da"></tt></ruby></track>
  • <code id="q49da"></code><track id="q49da"><strike id="q49da"></strike></track>
    <td id="q49da"><option id="q49da"></option></td>
    
  • <table id="q49da"><ruby id="q49da"></ruby></table>

    <p id="q49da"></p>
    新聞中心
    推薦資訊
    聯系我們
    全國服務熱線:
    18765894567
    地址:
    濟南市市中區經十西路
    郵箱:
    249058066@qq.com
    電話:
    18765894567
    傳真:
    18765894567
    技術資訊   當前位置:首頁> 新聞中心 > 技術資訊 > 集裝箱側門的功能設計要注意什么?
    集裝箱側門的功能設計要注意什么?來源:http://www.nomoredebtisgood.com   時間:2023-11-01
    對單扇門來說,通常采用一般性設計,滿足基本功能即可;而對多扇門來說,就要考慮門之間的連接:首先必須滿足基本的開關功能,其次要保證通常條件下的便利操作,再次就是具備密封防水性能。工地集裝箱廠家。
    For a single door, a general design is usually adopted to meet basic functions; For multiple doors, it is necessary to consider the connection between the doors: first, basic opening and closing functions must be met, second, convenient operation under normal conditions must be ensured, and third, sealing and waterproof performance must be achieved. Construction site container manufacturer.
    單扇門通常采用標準箱門的結構形式,包括內外門膠條,只要具有密封功能就能滿足要求。單扇門可采用端面密封膠條,這樣有助于門的開關,特別是從內部打開的門,端面密封更有助于實現輕松操作,內膠條可通用一切形狀。
    A single door usually adopts the structural form of a standard box door, including inner and outer door rubber strips. As long as it has a sealing function, it can meet the requirements. A single door can use end sealing strips, which help with the opening and closing of the door, especially for doors that open from the inside. The end sealing is more conducive to easy operation, and the inner sealing strip can be used in all shapes.
    對于多扇門的連接,要考慮門之間連接的可靠性和支撐功能,而且必須保證開關操作的便利性,降低開關難度,提高作業效率;密封防水性能通常通過門膠條實現,側門的上端通過設置雨檐增強防水性能。
    濟南集裝箱
    For the connection of multiple doors, it is necessary to consider the reliability and support function of the connection between doors, and ensure the convenience of switch operation, reduce the difficulty of switching, and improve work efficiency; The sealing and waterproofing performance is usually achieved through door adhesive strips, and the upper end of the side door is enhanced by setting rain eaves to enhance the waterproofing performance.
    多聯門箱主要用于公路運輸,側門可完全打開,這種設計便于貨物從側面進出箱體,還可使用叉車直接裝卸貨物,減少叉車運輸過程中對箱體的損壞。多聯門應考慮邊門對中門的支撐作用,特別是單邊三聯門,必須考慮三扇門內部強度的遞減或遞增,保證靠邊的門具有足夠的強度支撐其他門的關聯。
    Multiple door boxes are mainly used for road transportation, with side doors that can be fully opened. This design facilitates the entry and exit of goods from the side of the box. Forklifts can also be used to directly load and unload goods, reducing damage to the box during forklift transportation. Multiple doors should consider the supporting effect of the side door on the center door, especially for single side triple doors. It is necessary to consider the decreasing or increasing internal strength of the three doors to ensure that the side door has sufficient strength to support the association of other doors.
    輕質多聯門受重量限制,通常在箱內頂增加軌道支撐,與內門板連接,減少門開后的下垂問題。
    Lightweight multi link doors are limited by weight, and usually add track support on the top of the box to connect with the inner door panel, reducing the problem of sagging after opening the door.
    本文由濟南集裝箱廠家友情奉獻.更多有關的知識請點擊 http://www.nomoredebtisgood.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
    This article is a friendly contribution from Jinan container manufacturers. For more relevant knowledge, please click http://www.nomoredebtisgood.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
    欧美精品日本精品视频在线_亚洲乱妇老熟女爽到高潮的片_午夜福利在线视频国产不卡
    <track id="q49da"><ruby id="q49da"><tt id="q49da"></tt></ruby></track>
  • <code id="q49da"></code><track id="q49da"><strike id="q49da"></strike></track>
    <td id="q49da"><option id="q49da"></option></td>
    
  • <table id="q49da"><ruby id="q49da"></ruby></table>

    <p id="q49da"></p>